NAILCRAFT
Pure Base
Pure Base
Couldn't load pickup availability
PURE BASE is our 22-free base coat, created as an additional option for clients who may be sensitive to certain ingredients found within traditional nail systems.
At NAILCRAFT, we believe in working with a prescriptive base system. Rather than relying on one base coat for every client, nail techs can choose the formula best suited to the individual:
✨ Ultra Stick Base Regular
✨ Ultra Stick Base HEMA-Free
✨ PURE BASE 22-Free
All three of our base coats are compatible with every NAILCRAFT product, allowing you to tailor your base without limiting the rest of your service.
Use PURE BASE alongside NOVABUILD and PURE TOP to create a complete 22-free system.
Key features:
✨ 22-free formula
✨ HEMA-free
✨ TPO-free
✨ Di-HEMA-free
✨ IBOA-free
✨ Compatible with all NAILCRAFT products
✨ Part of our prescriptive base system
✨ Professional use only
Always perform a thorough consultation and select the most appropriate system for each individual client. A 22-free formula does not eliminate the possibility of an allergic reaction and you won’t see the same retention as some of our other bases. But it is a safer option to have available!
APPLICATION
APPLICATION
Apply as your final layer to complete your set!
Cure in your Lamp for 60 seconds and voila!
This is a no wipe top coat, so one it comes out the lamp you are free to go in with your favourite oils and creams. Avoid rubbing oil onto the topcoat for about 1 minute after curing. Applying oil or cream to a topcoat that is still warm from the lamp will cause it to dull in shine.
INGREDIENTS
INGREDIENTS
Acrylates Copolymer, Ethyl Mathacrylate, Ethyl Acetate, Synthetic Fluorphlogopite, Dimethicone , Hydroxycyclohexyl Phenyl Ketone
curing recommendation
curing recommendation
For best results cure in your lamp for 60 seconds on full power or 120 seconds on low heat mode.
Clear gel products have more chance of causing an exothermal reaction due to the lack of pigment, therefore the gel will cure at a faster rate and that may cause some heat for your client. If that happens, then cure in low heat mode or start with a distance cure (hand slightly out of the lamp for 10 seconds but still in range the light before putting into the lamp for the full cure)
While we’re working hard behind the scenes to bring you a NAILCRAFT lamp, in the meantime we recommend using:
- A minimum 36W lamp
- Nanometer range: 365 - 400 nm
- A lamp with a metal interior for optimum light reflection
- Always purchase from a reputable brand or seller
